Find your parts diagram

KokidoEV092CBX

BWT Kokido PWRBLADE 92 Rechargeable Heavy-Duty Pool Vacuum | EV092CBX

Regular price $172.99
Regular price $207.99 Sale price $172.99
-$35.00
Shipping calculated at checkout.
4.7★★★★★★★★★★ Customers love us · 100+ reviews
Pick up in storeNorth Hollywood · choose pickup at checkout
Local deliveryWithin 5 miles of our store
Ships nationwideMost orders ship in 1–2 business days

Pickup, delivery and shipping times are estimates, not guarantees.

Have a question about this part?

CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov

BWT Kokido PWRBLADE 92 Rechargeable Pool Vacuum

No hose.
No cord.
No leaves left.

The PWRBLADE 92 is a heavy-duty, battery-powered pool vacuum. Put it on a telescopic pole, switch it on, and its PWRBLADE impeller pulls leaves, debris and sand into a filter bag, with no hose, no pump and no cord.

Up to 75 Min per Charge Regular + Fine Filter Bags Water-Sensor Start Works to 9.8 ft Deep
BWT Kokido PWRBLADE 92 rechargeable pool vacuum, white body with turquoise side extensions and gray pole connector, on a sand pedestal against rippling pool-water light
Cordless Power
Front view of the Kokido PWRBLADE 92 pool vacuum with its filter bag fitted and both turquoise side extensions attached

Battery Powered, Water Activated

Cleaning Power That Starts on Its Own

A built-in rechargeable lithium-ion battery drives the impeller, so you never connect a hose to the skimmer or run your filter pump to vacuum. Turn the knob to on and lower the vacuum into the pool. Its water sensors detect the water and start the impeller within seconds, and it stops on its own shortly after you lift it out.

  • Up to 75 minutes of cleaning on a full charge
  • Charges in 5 to 6 hours. The adaptor light is red while charging and green when done.
  • The impeller starts 4 to 5 seconds after the vacuum goes into the water
  • It stops 2 to 3 seconds after you lift it out
  • No hoses, no skimmer connection and no cords in the pool
Leaves to Fine Sand

Two Filter Bags Included

The Right Bag for Every Mess

The PWRBLADE 92 comes with two filter bags. Use the regular bag for leaves and larger debris, and switch to the fine bag when the floor is covered in sand and finer dirt. Each bag twist-locks onto the top of the vacuum, and debris goes in from the front, sides and back.

  • Regular filter bag for leaves and larger debris
  • Fine filter bag for sand and finer debris
  • Twist-lock collar: line up the tab, then turn it clockwise to lock
  • Press the cord fastener to release the bag for emptying
  • Rinse the bag with water, or use only a soft brush if needed
Kokido PWRBLADE 92 regular and fine mesh filter bags with the charging adaptor and charging plug
Built for the Job

PWRBLADE 92 Features

Every feature here comes straight from Kokido's PWRBLADE 92 user manual.

PWRBLADE Impeller

If too much debris jams the impeller, it stops automatically to protect the motor, and the indicator light turns red.

Status Light

A light on top shows when the vacuum is on, running, low on battery, out of charge or clogged.

Removable Extensions

Click the left and right side extensions on to clean wide areas, or take them off to get into narrow spots.

Brushes and Wheels

Brushes clip into the underside, and three wheels help the vacuum glide across the pool floor.

Telescopic Pole Connector

The spring-loaded pole connector takes a standard telescopic pole. The pole is not included.

Slatted Cover Compartments

Remove one extension to clean the sunken compartment of an automatic slatted pool cover. The compartment needs at least 12 in. (30 cm) of clearance.

Saltwater Ready

You can use it in saltwater pools. Just make sure all the salt has dissolved before the vacuum goes in.

Waterproof Charging Pins

The charging pins are waterproof. Rinse and dry the port after each use to keep them clean.

A Closer Look at the PWRBLADE 92

Real photos of the vacuum: the impeller, the underside, and the side with its rating label.

Looking down into the Kokido PWRBLADE 92 intake at the turquoise PWRBLADE impeller

The PWRBLADE Impeller

The turquoise impeller sits inside the body and pulls water and debris up into the filter bag.

Underside of the Kokido PWRBLADE 92 pool vacuum with turquoise side extensions, brushes and wheels

The Underside

The intake, brushes, wheels and translucent side extensions all sit on the underside.

Side view of the Kokido PWRBLADE 92 showing the filter bag, switching knob, pole connector and model EV092 rating label

Knob and Pole Connector

Turn the knob clockwise for on and counterclockwise for off. The off position also opens the charging port.

How It Works

How to Use the PWRBLADE 92

Here is a full cleaning session, from the charger to the pool and back, based on Kokido's user manual.

  1. Charge It

    Turn the knob counterclockwise to off to open the charging port. Attach the charging plug, then connect the adaptor. Charge for 5 to 6 hours (about 6 hours the first time). The adaptor light turns from red to green when it is done.

  2. Set It Up

    Twist-lock the regular or fine filter bag onto the top, click on the side extensions if you need them, and slide a telescopic pole onto the pole connector until it locks onto the pins.

  3. Switch On

    At the side of the pool, turn the knob clockwise until it clicks. This exposes the water sensors, and the light turns blue.

  4. Lower It In

    Lower the vacuum all the way into the water. The light turns green, and the impeller starts after 4 to 5 seconds. The vacuum must be completely underwater to run.

  5. Vacuum

    Keep the vacuum flat on the floor and move it back and forth over the debris. If the light turns red, the impeller has stopped. Take the vacuum out, switch it off, and clear the impeller or empty the bag.

  6. Lift Out and Rinse

    Bring the vacuum to the side and flip it upside down before you lift it out, so debris stays in the bag. Empty the bag, rinse everything with fresh water, and dry the charging port.

After a session, let the vacuum rest for 30 to 40 minutes before you charge it again. Never leave the charging plug attached while the vacuum is in the water.

Sunlit, spotless swimming pool floor seen underwater with caustic light ripples

Know What It's Doing at a Glance

The status light on top of the PWRBLADE 92 shows you what the vacuum is doing, even from the pool deck.

Blue

Power on, ready to go

Blue, Flashing

Battery is running low

Green

Cleaning in progress

Green, Flashing

Battery is running low

Off

Battery depleted, needs a recharge

Red

Impeller stopped (clogged)

Indicator meanings from the Kokido PWRBLADE 92 user manual.

Where the PWRBLADE 92 Shines

Backyard swimming pool in autumn with fallen leaves on the pool floor

Leaf Season

Use the regular bag for leaves and larger debris, and keep vacuuming for up to 75 minutes per charge.

Modern swimming pool with an automatic slatted pool cover partly rolled up

Slatted Cover Pools

With one extension removed, the vacuum fits down into the sunken compartment of an automatic slatted cover.

Clean backyard swimming pool with wide entry steps and lounge chairs at sunset

Steps, Ledges and Corners

There is no hose to drag around, so you can steer it into tight spots. Take the side extensions off for narrow areas.

Specifications

Kokido PWRBLADE 92 Specifications

From Kokido's PWRBLADE 92 user manual and the rating label on the vacuum

75 minMax Runtime
5–6 hCharge Time
9.8 ftMax Depth
2 BagsRegular + Fine
BrandBWT Kokido
ModelPWRBLADE 92, model EV092
TypeCordless rechargeable pool vacuum (pole operated)
BatteryBuilt-in rechargeable lithium-ion
RuntimeUp to 75 minutes per full charge
Charge Time5 to 6 hours (about 6 hours the first time)
Charging Input13.5V ⎓ 1.0A (from the unit rating label)
Max Depth3 m (9.8 ft)
Water Temperature41 °F to 107.6 °F (5 °C to 42 °C)
FiltrationRegular filter bag and fine filter bag
Start/StopWater sensors start and stop the impeller automatically
PoleStandard telescopic pole (not included)
In the BoxVacuum, regular and fine filter bags, left and right extensions, brushes, pole connector, charging plug, adaptor

PWRBLADE 92 Replacement Parts

Part numbers from the parts list in Kokido's EV092 user manual. Several parts are shared with Kokido's EV90 vacuums.

  • Regular Filter Bag

    EV90-06R
  • Fine Filter Bag

    EV90-011
  • Brushes (Left and Right)

    EV90-11
  • Wheel (x3)

    EV90ASM03
  • Side Extensions

    EV90ASM02
  • Wheel Bracket

    EV90-01-001
  • Charging Plug

    EV90-09
  • Adaptor (US)

    EV90-08-002/US
  • Telescopic Pole Connector (US/EU)

    K969ASM06/PWR
  • Main Unit (US)

    EV092ASM01/US
Questions

Kokido PWRBLADE 92 FAQ

Quick answers about the PWRBLADE 92 rechargeable pool vacuum

No. It runs on its own built-in rechargeable battery and impeller. There is no hose to connect, and you don't need to run the pool pump. You only need a telescopic pole to steer it.

Kokido rates it for up to 75 minutes on a full charge. A heavily loaded filter bag works the motor harder and can shorten the runtime, so empty the bag regularly.

Charge it for 5 to 6 hours, and fully charge it (about 6 hours) before the first use. The adaptor light is red while charging and turns green when the battery is full. After cleaning, let the vacuum rest for 30 to 40 minutes before you charge it again.

No. The PWRBLADE 92 includes a spring-loaded pole connector that fits a standard telescopic pool pole, sold separately.

Use the regular filter bag for leaves and larger debris. Switch to the fine filter bag when the pool has sand and finer dirt. Both bags come in the box.

A red light means the impeller has stopped, usually because debris jammed it or the bag is full. Take the vacuum out of the water, turn the knob counterclockwise to switch it off, then clear the impeller or empty the bag. Turn it back on to keep cleaning.

Yes. The Kokido manual only asks that all the salt be fully dissolved before the vacuum goes into the water. Rinse the vacuum with fresh water after every use.

No. The PWRBLADE 92 is its own model (EV092) with its own main unit. Kokido's parts list shows that it shares some replacement parts with the EV90 family, including the regular (EV90-06R) and fine (EV90-011) filter bags.

Care and Storage for Your PWRBLADE 92

From the Kokido user manual

After Every Use

Rinse the vacuum with fresh water and don't use harsh detergents. Dry the charging port, pins and water sensors with a cotton swab. If stains form, a swab dipped in lemon juice or vinegar will remove them.

Off-Season Storage

Store the vacuum at 30 to 50% charge, and recharge it at least once every three months. Keep it somewhere dry and well ventilated at 50 to 77 °F (10 to 25 °C), away from sun, heat and pool chemicals.

Charging Safely

Use only the adaptor and charging plug that come with the vacuum, and plug the adaptor into a GFCI-protected outlet. Make sure the plug and port are clean and dry before you charge.

Battery

Never open the main unit or try to replace the impeller, motor or battery yourself. If the battery stops charging fully or the runtime drops noticeably, contact your dealer.

This is not a toy. Keep children away from the vacuum and its accessories, and only run it when it is fully underwater.

Los Angeles Local Installation Request

Need professional pool equipment installation in the Los Angeles, California area? We handle installation of heaters, pumps, filters, automation systems, and more. Fill out the form below, and we will contact you soon to schedule your local service!

Click to Request Install
Google reviews

What LA pool owners say about us