Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
ClearView CVDB050 Shimmer N Shock | Granular Chlorine | 50lb | CVDB050
In-store pickup & local delivery only. This item can't be shipped — choose pickup or local delivery at checkout.
Couldn't load pickup availability
● 12 in stock30-day returns Secure checkout
Have a question about this part?
Ask about fit, specs or shipping and get an instant answer.
Goes with this part
Manuals & documents
- ClearView Shimmer N Shock Safety Sheet PDF · 294 KB View PDF
- ClearView Shimmer N Shock Instructions PDF · 96 KB View PDF
CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov
OEM ClearView Shimmer N Shock Granular Chlorine CVDB050 is a high-efficiency chlorine shock formulated to maintain clean, clear water in residential pool systems. With 99% sodium dichlor and 56% available chlorine, it provides strong disinfection that quickly destroys algae, bacteria, and swimmer contaminants. This 50 lb granular blend dissolves completely upon contact with water, eliminating the need for pre-dissolving and leaving no residue behind. Perfect for vinyl-lined and above-ground pools, Shimmer N Shock prevents pH fluctuation and supports consistent water balance, making it an easy-to-use solution for both weekly maintenance and heavy-use recovery.
-
High Chlorine Strength: Combines high-purity sodium dichlor and fast-acting chlorine for dependable pool sanitation
-
Fast-Dissolving Formula: Designed to dissolve instantly, leaving no residue and requiring no pre-mixing
-
Effective Algae & Bacteria Control: Quickly eradicates microorganisms and restores bright, clear water
-
Safe for Vinyl & Above-Ground Pools: Will not bleach liners or alter pH levels, making it safe for routine use
-
Economical Seasonal Maintenance: Large 50 lb format provides long-term value for maintaining healthy pool water
This product is intended for use in controlling bacteria and algae in swimming pools. This product should be added directly to the surface of circulating water according to the directions. Each ounce of this product will provide about 0.4 ppm (mg/L) of available chlorine to 10,000 gallons of water. Reentry into treated swimming pools is prohibited above levels of 4 ppm of chlorine.
How to Use: Add dosage of this product during evening hours while filter is running. When adding this product to your pool, broadcast the product evenly over a wide area in the deepest part of the pool. Use entire contents when opened. If any granules settle to the bottom of the pool use brush to disperse.
Start Up: Before using this product, make sure that the filtration system is clean and operating properly. Adjust the pH of the water to a range of 7.2-7.6 using suitable products and a reliable test kit. Adjust the alkalinity of the water to a minimum of 125 ppm (mg/L), based on the test kit reading. Add a sufficient amount of this product directly to the surface of circulating water to raise the free chlorine level in the water to 5-6 ppm (mg/L), based on the test kit reading. As a guide, for swimming pools addition of 10 ounces of this product for each 10,000 gallons of water will increase the free residual chlorine by 4 ppm (mg/L).
Shock Treatment: Super chlorination: In extremely hot weather, when many people use the pool, when water becomes hazy or after heavy rains, a shock dosage of chlorine may be obtained by spreading this product over surface pool water. 14 ounces of this product per 10,000 gallons of pool water provides approximately 6 ppm of chlorine. Note: Do not use pool until chlorine residual falls below 4 ppm.
Maintenance Treatment: Add this product daily or as needed to maintain the free chlorine residual in the water at 1-3 ppm (mg/L) as indicated by a reliable test kit. Each ounce of this product will provide about 0.4 ppm (mg/L) of available chlorine to 10,000 gallons of water. Weather and usage effect sanitizer levels. Maintain the pH at 7.2-7.6 and the alkalinity at a minimum of 125 ppm (mg/L). As a guide for swimming pools, addition of five ounces of this product for each 10,000 gallons of water will increase the free residual chlorine by 2 ppm (mg/L).