Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
Eeziblue Monthly Algaecide & Water Clarifier | 21oz | EB-MA-21OZ
Pickup, delivery and shipping times are estimates, not guarantees.
Couldn't load pickup availability
Have a question about this part?
Ask about fit, specs or shipping and get an instant answer.
Goes with this part
CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov
Eeziblue Monthly Algaecide 21oz EB-MA-21OZ is a powerful and multi-functional pool treatment formulated with the patented Zn-Cu Synergy technology, blending zinc and copper to control algae and improve water clarity while lowering phosphate levels. Ideal for pools up to 20,000 gallons, this advanced formula works in both chlorine and saltwater systems, acting as an algaecide, bactericide, clarifier, and phosphate remover in one easy-to-use product. Eeziblue reduces chlorine consumption by as much as 75%, helping you save on chemicals while providing a more comfortable swim. Its weather-resistant properties help stabilize water balance during extreme conditions, reducing the need for mid-season adjustments. The 21-ounce pouch is designed to clear green pools fast when used with proper pool chemistry, streamlining your pool care routine.
- Zn-Cu Synergy™ Technology: Combines zinc and copper to effectively prevent and kill algae while enhancing water clarity.
- Multi-Use Formula: Compatible with chlorine and saltwater pools; works as an algaecide, bactericide, phosphate remover, and clarifier.
- Chlorine Saver: Cuts chlorine demand by up to 75% for more efficient and economical pool care.
- Streamlined Maintenance: Improves water clarity and supports filtration efficiency, making pool upkeep easier.
21oz of this product treats 13,000 to 20,000 gallons. For pools on the lower end of this range, use half of this product per month.
Application For Green To Clear
1. Backwash pool for up to 2 minutes then rinse for 20 seconds, or clean filters before application.
2. Check and adjust pH to between 6.8 and 7.4
3. Disconnect any automatic pool cleaners. With the pump running and multiport set to the filter position pour contents directly into pool skimmer.
4. Add 2.2 lbs of chlorine shock per 20,000 gallons to the pool (if using Calcium Hypochlorite shock administer via the pool skimmer only).
5. Run pump for 30 minutes, then return to normal cycle. No swimming, vacuuming, or brushing until pool clears. Expect pool to go cloudy within 30 minutes after application. This is normal and will clear shortly thereafter.
6. Vacuum the resultant residue once the debris has settled.
Application For Monthly Maintenance
1. Backwash pool for up to 2 minutes then rinse for 20 seconds, or clean filters before application.
2. With the pump running and multiport set to the filter position, pour contents directly into the pool skimmer.
3. Run the pool pump continuously for 30 minutes after application, then return pump to normal cycle.
4. Repeat application monthly.
Pool Care Guidelines
Maintain pool chemistry:
• Chlorine: 0.5 - 1.0 ppm
• pH: 6.8 - 7.4
• Alkalinity: 80 - 120 ppm
• Cyanuric Acid: below 50 ppm
Ensure your copper levels are at or below 0.2 pm before application. If the copper is higher than 0.2 pm then pause application until this threshold is reached. This scenario is common in low use pools or during winter monihs.
If pool water discoloration occurs if is usually associated with extreme weather conditions (.e. lightning, rain, extreme heat) and or unexpected high bather loads - check your pH and free chlorine levels immediately and adjust if required, it may be necessary to so shock" your pool with additional chlorine.
Saltwater pool application - normal application applies but be prepared to lower the output to maintain a new lower free chlorine reading to between 0.5 ppm and 1 ppm.
For best results use Trichlor tablets with the Monthly Maintenance application.