Polaris R0536700 Backplate With Shaft Seal and O-Ring | For New Style PB4-60 Booster Pumps
Couldn't load pickup availability
CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov
Found In These Collections
OEM Polaris Backplate with Shaft Seal and O-Ring R0536700 is a precision-manufactured replacement set designed for use with new style PB4-60 Booster Pumps. This genuine Polaris part includes a backplate, shaft seal, and O-ring to reestablish a secure and effective seal. Built to Polaris standards using quality materials, this assembly supports consistent operation while reducing wear and potential leakage. Easy to install, it’s a necessary component to maintain long-term performance and efficiency of your booster pump.
Highlights
-
Designed for Booster Systems: Specifically made for Polaris PB4-60 new style booster pumps to ensure an exact match and dependable performance.
-
Includes Essential Sealing Parts: Comes with a backplate, O-ring, and shaft seal to fully restore sealing capability and functionality.
-
Constructed for Durability: Fabricated from high-strength materials that hold up under pressure and extend system lifespan.
-
Reduces Wear and Leaks: Prevents water loss and mechanical strain, keeping your booster pump performing at its best.
-
Quick and Reliable Installation: Easy to replace with minimal effort, making it a key part of ongoing pump maintenance.
Includes
- (1) Polaris R0536700 Backplate
- (1) Shaft Seal
- (1) O-Ring
Installation
1. If the pump is located below water level, isolation valves must be installed on both sides of the pump
to prevent back flow of pool water during any routine or required servicing.
2. To help prevent difficulty in priming, install the suction pipe without high points (above inlet of pump - inverted “U”s in plumbing), which can trap air.
3. The piping must be well supported and not forced together where constant stress will be experienced.
4. Always use properly sized valves. Jandy® Pro Series diverter valves and ball valves typically.
5. Use the fewest fittings possible. Every additional fitting has the effect of moving the equipment farther away from the water.
Compatibility
- Polaris New Style PB4-60 Booster Pumps (Manufactured after serial number PB120111001 or 2011)
Additional Info
Polaris Backplate Kit With Seals
booster pump backplate o-ring shaft seal
r0536700 polaris oem pump housing assembly
polaris pb4-60 new model backplate kit
complete seal assembly for booster pumps
pb4-60 part number r0536700 housing kit
Prevent Leaks and Boost Efficiency
stop seal failure in pb4-60 pump housing
reduce leak risks with booster backplate
o-ring and shaft seal for new pb4-60 series
fix pressure loss in polaris booster system
save with local pricing on pump repair parts
Long-Lasting, Easy Install Part
install-ready part for pb4-60 booster pump
durable construction booster pump backplate
easy fit oem housing for updated pump model
local price on polaris r0536700 kit
oem part ensures long pump lifespan
Diagram
- Description
- Highlights
- Includes
- Installation
- Compatibility
- Additional Info
- Diagram
- Reviews
OEM Polaris Backplate with Shaft Seal and O-Ring R0536700 is a precision-manufactured replacement set designed for use with new style PB4-60 Booster Pumps. This genuine Polaris part includes a backplate, shaft seal, and O-ring to reestablish a secure and effective seal. Built to Polaris standards using quality materials, this assembly supports consistent operation while reducing wear and potential leakage. Easy to install, it’s a necessary component to maintain long-term performance and efficiency of your booster pump.
-
Designed for Booster Systems: Specifically made for Polaris PB4-60 new style booster pumps to ensure an exact match and dependable performance.
-
Includes Essential Sealing Parts: Comes with a backplate, O-ring, and shaft seal to fully restore sealing capability and functionality.
-
Constructed for Durability: Fabricated from high-strength materials that hold up under pressure and extend system lifespan.
-
Reduces Wear and Leaks: Prevents water loss and mechanical strain, keeping your booster pump performing at its best.
-
Quick and Reliable Installation: Easy to replace with minimal effort, making it a key part of ongoing pump maintenance.
- (1) Polaris R0536700 Backplate
- (1) Shaft Seal
- (1) O-Ring
1. If the pump is located below water level, isolation valves must be installed on both sides of the pump
to prevent back flow of pool water during any routine or required servicing.
2. To help prevent difficulty in priming, install the suction pipe without high points (above inlet of pump - inverted “U”s in plumbing), which can trap air.
3. The piping must be well supported and not forced together where constant stress will be experienced.
4. Always use properly sized valves. Jandy® Pro Series diverter valves and ball valves typically.
5. Use the fewest fittings possible. Every additional fitting has the effect of moving the equipment farther away from the water.
- Polaris New Style PB4-60 Booster Pumps (Manufactured after serial number PB120111001 or 2011)
Polaris Backplate Kit With Seals
booster pump backplate o-ring shaft seal
r0536700 polaris oem pump housing assembly
polaris pb4-60 new model backplate kit
complete seal assembly for booster pumps
pb4-60 part number r0536700 housing kit
Prevent Leaks and Boost Efficiency
stop seal failure in pb4-60 pump housing
reduce leak risks with booster backplate
o-ring and shaft seal for new pb4-60 series
fix pressure loss in polaris booster system
save with local pricing on pump repair parts
Long-Lasting, Easy Install Part
install-ready part for pb4-60 booster pump
durable construction booster pump backplate
easy fit oem housing for updated pump model
local price on polaris r0536700 kit
oem part ensures long pump lifespan