Ramuc Submersible UT-218 Waterpark Blue Non-Stick Coating | 21806

The Ramuc Tuff Coat UT-218 is a single-component, water-based rubberized non-skid coating in Waterpark Blue, purpose-built for aquatic facilities, pool decks, splash pads, wave pools, and water attraction surfaces that demand the clean, classic look of a traditional pool blue finish. Part of the proven UT-200 series, the formula cross-links urethanes, acrylics, co-polymers, and recycled rubber granules into a flexible, fully submersible coating that bonds directly to concrete, wood, fiberglass, and metal without requiring a separate primer. Waterpark Blue is the signature color of the Tuff Coat line, the preferred choice of water park designers and aquatic facility managers looking for a vibrant, professional-grade finish that holds its color under continuous submersion, UV exposure, and heavy foot traffic. Covering 40–45 square feet per gallon in two coats, the UT-218 dries to touch in approximately one hour, is top-coatable in one to two hours, and reaches full chemical cure in 24 hours to five days. Application is handled with a Tuff Coat roller or low-pressure hopper spray gun, the coating is thinned with water only, and the formula is fully VOC-compliant.

Highlights

• Signature Waterpark Blue Finish: The vibrant Waterpark Blue colorway delivers the clean, classic aquatic look favored by water park designers, pool builders, and commercial facility managers, providing a bold, professional finish that holds its color under continuous submersion, ongoing UV exposure, and heavy foot traffic year after year.
• Cross-Linked Submersible Coating: A water-based blend that cross-links urethanes, acrylics, co-polymers, and recycled rubber granules into a flexible, impact-resistant film that resists cracking, peeling, and delamination across continuously wet, submerged, and chemically active pool and aquatic facility environments.
• Adheres to Many Aquatic Substrates: Bonds directly to concrete, wood, fiberglass, and metal across both interior and exterior locations without the need for a separate primer step, making the UT-218 a versatile solution for pool decks, waterslide surfaces, splash pads, docks, wave pools, and high-traffic aquatic walkways.
• 30–35 Mil Medium-Texture Build: Cures to a rubberized medium-texture finish at 30–35 mils of thickness, providing reliable underfoot traction on wet surfaces and significantly reducing slip-and-fall risk across high-traffic aquatic surfaces, commercial water attractions, and busy splash play zones.
• Quick Recoat, Water-Based Cleanup: Touch-dry in roughly one hour and top-coatable in one to two hours, with full chemical cure reached anywhere from 24 hours to five days, and because the UT-218 is water-based and VOC-compliant, both roller and low-pressure hopper spray application clean up with water rather than solvents.