Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
Ramuc Submersible UT-219 Rubber White Non-Stick Coating | 21906
Pickup, delivery and shipping times are estimates, not guarantees.
Couldn't load pickup availability
Have a question about this part?
Ask about fit, specs or shipping and get an instant answer.
Goes with this part
CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov
The Ramuc Tuff Coat UT-219 is a single-component, water-based rubberized non-skid coating in White, engineered for pool decks, splash pads, docks, boat ramps, and high-traffic aquatic surfaces that need a clean, bright, slip-resistant finish. Part of the proven UT-200 series, its formula cross-links urethanes, acrylics, co-polymers, and recycled rubber granules into a flexible, fully submersible coating that bonds directly to concrete, wood, fiberglass, and metal without requiring a separate primer. White is one of the most versatile colorways in the Tuff Coat line, equally suited for full deck applications, waterpark surfaces, pool coping, and as a bright base layer when paired with lane-marking or safety accent colors. Covering 40–45 square feet per gallon in two coats, the UT-219 dries to touch in approximately one hour, is top-coatable in one to two hours, and reaches full chemical cure in 24 hours to five days. Application is handled with a Tuff Coat roller or low-pressure hopper spray gun, the coating is thinned with water only, and the formula is fully VOC-compliant.
- Bright White Finish for Aquatic Use: White is one of the most widely used colorways in the Tuff Coat line, delivering a bright, neutral surface well suited for full pool deck coverage, waterpark areas, and pool coping, and serving as a versatile base layer when paired with safety yellow or lane-marking accent colors.
- Cross-Linked Submersible Formula: A water-based blend that cross-links urethanes, acrylics, co-polymers, and recycled rubber granules into a flexible, impact-resistant coating that resists cracking, peeling, and delamination across continuously wet, submerged, and chemically active aquatic surfaces.
- Adheres to Multiple Substrates: Bonds directly to concrete, wood, fiberglass, and metal across both interior and exterior locations without the need for a separate primer step, making the UT-219 a flexible solution for pool decks, splash pads, docks, boat ramps, patios, and other high-traffic aquatic walkways.
- 30–35 Mil Medium-Texture Surface: Cures to a rubberized medium-texture finish at 30–35 mils of thickness, providing reliable underfoot traction when surfaces are wet and helping reduce slip-and-fall risk across pool decks, ramps, splash zones, and aquatic walkways at residential and commercial facilities.
- Quick Recoat and Water-Based Cleanup: Touch-dry in about one hour and top-coatable in one to two hours, with full chemical cure reached between 24 hours and five days, and because the UT-219 is water-based and VOC-compliant, both roller and low-pressure hopper spray application clean up with water rather than solvents.
