Ramuc Submersible UT-221 Safety Yellow Non-Stick Coating | 22106

The Ramuc Tuff Coat UT-221 is a single-component, water-based rubberized non-skid coating formulated in Safety Yellow for high-visibility pool deck, splash pad, dock, and aquatic safety applications. Fully submersible and engineered for both interior and exterior use, it bonds directly to concrete, wood, fiberglass, and metal surfaces, delivering a flexible, impact-resistant, medium-texture finish that dries to 30–35 mils of thickness. Safety Yellow is the standard choice for marking hazard zones, depth transition areas, lane dividers, ramps, and other high-traffic aquatic surfaces where bold visual contrast and slip-resistant protection are required by safety standards. Covering 40–45 square feet per gallon in two coats, the UT-221 is ready to touch in approximately one hour, top-coatable in one to two hours, and reaches a full chemical cure in 24 hours to five days. Application is handled with a Tuff Coat roller or low-pressure hopper spray gun, thinning is done with water only, and the formula is VOC-compliant for use in both commercial and residential aquatic facilities.

Highlights

• High-Visibility Safety Yellow Color: The bold Safety Yellow colorway is intended for marking hazard zones, depth transitions, ramps, lane dividers, and safety boundaries on pool decks, splash pads, and aquatic facilities where high-contrast visibility is critical for code compliance and overall facility safety.
• Fully Submersible Rubberized Coating: A single-component, water-based rubberized formula that stays flexible after curing, resisting cracking, peeling, and delamination even when the coated surface is exposed to continuous wet, submerged, and chemically active pool and spa environments.
• Bonds to Multiple Substrates Without Primer: Applies directly to concrete, wood, fiberglass, and metal across interior and exterior locations without a separate primer step, making the UT-221 a versatile coating choice for pool decks, docks, boat ramps, patios, and other high-traffic aquatic walkways.
• Medium-Texture Non-Skid Finish: Cures to a 30–35 mil rubberized medium-texture finish that provides dependable slip resistance underfoot when surfaces are wet, helping reduce the risk of slip-and-fall incidents on pool decks, ramps, transitions, and splash zones at commercial and residential aquatic facilities.
• Fast Dry, Easy Water Cleanup: Touchable in roughly one hour and re-coatable in one to two hours, with full chemical cure reached anywhere from 24 hours to five days, and because the formula is water-based, both roller and low-pressure hopper spray application clean up simply with water rather than solvents.