Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
Who needs this
| Needed when | Putting a Salt Pool Jump Stand (or 606/608 Cantilever stand) on an existing concrete deck with no jig in it. |
| Skip it if | You bolt onto an existing 606/608 Cantilever jig, or you are pouring new concrete (use the jig from the stand box). |
| Concrete | At least 6″ thick, 3500 psi or stronger. |
The S.R. Smith epoxy anchor kit 75-209-5868-SS lets you set a four-bolt S.R. Smith jump stand on an existing concrete deck. Instead of casting a jig in new concrete, you drill four holes in the deck and epoxy in the stainless bolts in the 606/608 jig pattern.
Highlights
- Four 6″ × ½″ stainless anchor bolts + epoxy
- For the S.R. Smith Salt Pool Jump Stand base and 606/608 Cantilever jump stands
- No new concrete pour needed
Part number: 75-209-5868-SS
Specifications
| Part | 75-209-5868-SS |
| Contents | Four 6″ × ½″ stainless bolts + epoxy |
| Bolt pattern | S.R. Smith 606/608 four-bolt jig |
| For | Salt Pool Jump Stand base, 606/608 Cantilever jump stand |
Downloads
📄 S.R. Smith residential diving boards & stands guide (PDF)
Install every board and stand following S.R. Smith’s instructions and your local codes.
