Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
What you need with this spring
| Also needed | The Salt Pool Jump Stand base (69-209-62 / 610 / 620) – these springs fit only that base. |
| Board | S.R. Smith Frontier III of the same length (sold separately; the board comes with its mounting bolts). |
| In the box | Spring assembly + spring-to-base hardware. |
| Note | Does not interchange with Supreme or Cantilever springs. |
The S.R. Smith Salt Pool spring assembly is the spring half of S.R. Smith’s salt-friendly jump board system. The composite springs mount between the Salt Pool Jump Stand base and the board and give the board its jump. Choose the length of your board.
Highlights
- Salt-friendly composite springs
- Includes the spring-to-base stainless hardware
- 6′ or 8′ – match your Frontier III board
- Radiant White, Taupe or Pewter Gray
Part numbers: 6′ 69-209-662 / 69-209-6610 / 69-209-6620; 8′ 69-209-682 / 69-209-6810 / 69-209-6820 (White / Taupe / Pewter Gray).
Specifications
| Model | S.R. Smith Salt Pool spring assembly |
| Lengths | 6′ (69-209-662 / 6610 / 6620), 8′ (69-209-682 / 6810 / 6820) |
| In the box | Spring assembly + spring-to-base hardware |
| Fits | Salt Pool Jump Stand base only |
| Fits boards | Frontier III of the same length |
| Shipping | 6′: 40″ × 5″ × 3″, 10 lb; 8′: 48″ × 5″ × 3″, 14 lb |
| Salt pools | Yes – made for them |
Downloads
📄 S.R. Smith residential diving boards & stands guide (PDF)
Install every board and stand following S.R. Smith’s instructions and your local codes.
