Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
The Saftron 3-Bend Cross-Braced Return-to-Deck Handrail (52″ × 32″) gives swimmers a long, sturdy rail to hold while stepping in and out of the pool. Both ends go into the deck and the cross brace stiffens the rail. Inside is encapsulated marine-grade aluminum; outside is a high-impact polymer shell that resists pool chemicals, salt and UV and stays cool to the touch. It needs no bonding or grounding and comes with matching color escutcheons.
Highlights
- Reinforced core – encapsulated aluminum for strength without corrosion.
- Chemical- and UV-resistant finish – resists fading, salt and pool chemicals.
- No bonding or grounding required – electrically insulated polymer rail.
- Cool-to-touch surface – comfortable to hold in the sun.
- Color-matched escutcheons included.
Specifications
| Model | Saftron CBRTD-352 (add colour letter: -W, -B, -G, -GG, -T, -BK) |
| Size (on center) | 52″ long × 32″ tall, 3 bends, cross braced |
| Legs | 2, both go into the deck, 8″ apart (center to center); the cross brace sits 8″ above the deck |
| Distance from pool edge | Your choice (“varies” on the drawing) |
| Bends | 6″ radius |
| Tubing | 1.90″ OD, 1.38″ ID, 0.25″ wall |
| Material | High-impact polymer over a fully reinforced aluminum core; no bonding or grounding needed |
| Colors | White, Beige, Gray, Graphite Gray, Taupe, Black |
| In the box | Rail + matching escutcheons (deck cover plates) |
| Shipping box | 56″ × 40″ × 2″, about 20 lbs |
| Warranty | 5 years (manufacturer) |
How to install it (pick one)
The rail has 2 legs, so you need 2 of whichever mount you choose. Anchors are not included.
Note: Saftron makes its 3″ surface base for ladders. For handrails it specifies the 6″ base (or anchor sockets).
Installation tips
- Mark each leg before installing: 3⅝″ up for an anchor socket, 5⅝″ for a 6″ base. The legs must rest on the bottom of the socket or base.
- The rail is only as solid as the deck under it. Check the deck first.
- Core drilling needs special tools; Saftron recommends professional installation for core-drilled installs.
- Don’t use the rail until the grout has fully cured. Keep it in the box until you install it to avoid scratches.
Care
Clean with a soft cloth and a low-abrasion cleaner such as Soft Scrub. Do not use abrasives or commercial solvents.
Downloads
📄 CBRTD data sheet📄 Anchor socket install📄 6″ base install📄 Core drill & grout install📄 Tools & guidelines📄 Cleaning
Los Angeles Local Installation Request
Need professional pool equipment installation in the Los Angeles, California area? We handle installation of heaters, pumps, filters, automation systems, and more. Fill out the form below, and we will contact you soon to schedule your local service!
