Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
United Chemical Yellow Treat®² (YT2-45LB-C1), 45 lb pail. Granular sodium bromide (67.6%) mustard algicide, EPA registered. Dose 5 oz per 10,000 gallons, followed by super-chlorination. Bulk size for service routes and commercial pools - one pail treats about 1.4 million gallons.
- Product: United Chemical Yellow Treat®² Mustard Algicide
- Size: 45 lb pail
- Active ingredient: sodium bromide (67.6%)
- Form: granular
- Dose: 5 oz per 10,000 gallons (spa: 1/4 oz per 500 gallons)
- EPA registered algicide
- Not a DOT-regulated material (per SDS)
- Killing mustard (yellow) algae on walls, steps, and shaded spots.
- Clearing blooms that come back after normal shocking.
- Busy pool routes and commercial pools that go through a lot of product.
- Chlorine and saltwater pools
- Bromine pools and spas
- White and colored plaster, exposed aggregate, fiberglass, painted, and vinyl surfaces
- Run the filter and brush the walls and steps where the yellow film is.
- Broadcast 5 oz (one level capful) per 10,000 gallons over the water.
- Brush the treated areas again right away.
- Shock the pool right after, whatever your chlorine reading is, at the shock product label rate.
- Clean or backwash the filter the next day.
Note: Follow the EPA label. SDS: not a DOT controlled material. Ships ground only due to weight.
