1. Home
  3. Valterra Cyanuric Acid Test | 8 oz | B7525
By Valterra

Valterra Cyanuric Acid Test | 8 oz | B7525

$13.99
$17.99 $13.99
-$4.00
Brand: Valterra
Availability: 25 in stock
SKU: B7525

CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov

Found In These Collections

The Blue Devil Valterra 200' Backwash Hose with Clamp B8202X is designed to efficiently discharge wastewater from pool filters, ensuring effective filtration maintenance. Made of heavy-duty 22 mil reinforced vinyl, the 2-inch by 200-foot hose is durable and can be cut to the desired length for customized use. It attaches easily to a tapered fitting inserted into the backwash port of the filter, simplifying the backwashing process.

Highlights

  • Heavy-Duty Construction: Made from 22 mil reinforced vinyl for durability and long-lasting use.

  • Extended 200-Foot Length: Provides ample reach and can be cut to the desired length for customized use.

  • Efficient Backwashing: Designed to discharge wastewater from pool filters for effective filtration maintenance.

  • Easy Attachment: Connects securely to a tapered fitting for a hassle-free setup.

  • Versatile & Reliable: Ideal for residential and commercial pool maintenance applications.

Instruction

Cyanuric Acid is often called stabilizer or conditioner because it reduces the loss of chlorine due to sunlight exposure.

1. With test stick resting a the bottom of tube, fill pool water to line "A" on test stick.
2. Now fill tube with test solution to line "B" on the test stick.
3. Mix solution by moving test stick up and down for 30 seconds, leaving test stick at bottom position.
4. Allow the mixture to set for approximately 2 minutes, but no longer than 5 minutes before continuing test.
5. Now looking down through solution from the top, observe black dot. If black dot is not visible, raise test stick above water level and slowly lower it until black dot disappears.
Now read the number value on the front of the test stick closest to water level, viewed through the dear tube.
This is your reading in parts per million of Cyanuric Acid to a million parts of pool water.

If black dot is still visible with the stick resting on the bottom of the test tube, your pool contains less than 20 parts per million (PPM) of Cyanuric Acid.
The recommended level of Cyanuric Acid is 30-70 PFM. If your water test is over or under this range, consult your poor store specialist for advice.

Description

The Blue Devil Valterra 200' Backwash Hose with Clamp B8202X is designed to efficiently discharge wastewater from pool filters, ensuring effective filtration maintenance. Made of heavy-duty 22 mil reinforced vinyl, the 2-inch by 200-foot hose is durable and can be cut to the desired length for customized use. It attaches easily to a tapered fitting inserted into the backwash port of the filter, simplifying the backwashing process.

Highlights

  • Heavy-Duty Construction: Made from 22 mil reinforced vinyl for durability and long-lasting use.

  • Extended 200-Foot Length: Provides ample reach and can be cut to the desired length for customized use.

  • Efficient Backwashing: Designed to discharge wastewater from pool filters for effective filtration maintenance.

  • Easy Attachment: Connects securely to a tapered fitting for a hassle-free setup.

  • Versatile & Reliable: Ideal for residential and commercial pool maintenance applications.

Instruction

Cyanuric Acid is often called stabilizer or conditioner because it reduces the loss of chlorine due to sunlight exposure.

1. With test stick resting a the bottom of tube, fill pool water to line "A" on test stick.
2. Now fill tube with test solution to line "B" on the test stick.
3. Mix solution by moving test stick up and down for 30 seconds, leaving test stick at bottom position.
4. Allow the mixture to set for approximately 2 minutes, but no longer than 5 minutes before continuing test.
5. Now looking down through solution from the top, observe black dot. If black dot is not visible, raise test stick above water level and slowly lower it until black dot disappears.
Now read the number value on the front of the test stick closest to water level, viewed through the dear tube.
This is your reading in parts per million of Cyanuric Acid to a million parts of pool water.

If black dot is still visible with the stick resting on the bottom of the test tube, your pool contains less than 20 parts per million (PPM) of Cyanuric Acid.
The recommended level of Cyanuric Acid is 30-70 PFM. If your water test is over or under this range, consult your poor store specialist for advice.