Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
The Nature2 Fusion Soft uses a dual sanitizing approach that combines an electrolytic cell and mineral cartridge for enhanced pool water treatment. Its power pack connects to the pool pump’s electrical system, enabling the cell to activate only when water is circulating. As saltwater flows through the cell, bipolar electrodes generate chlorine through electrolysis, with output adjustable via the power center settings or the system's runtime. The unit features an auto-cleaning mechanism that reverses electrode polarity every three hours, maintaining performance without interrupting chlorine production. Meanwhile, the mineral cartridge introduces controlled amounts of silver and copper, providing effective support in preventing algae growth.
-
Pump-Linked Activation: Cell runs only when pool circulation is on, aligning chlorine production with water movement
-
Sensor Redundancy Built-In: Flow/temp/salinity sensor acts as a backup to enhance operational safeguards
-
Chlorine Control Options: Adjust chlorine output by setting the power center or changing how long the unit runs each day
-
Polarity Reversal System: Self-cleans electrodes every three hours without disrupting chlorine output
-
Algae Prevention Minerals: Mineral cartridge dispenses silver and copper to enhance sanitization and deter algae
- Unplug the DC cord from electrolytic cell.
- Run the pool pump and filter for five (5) minutes. After this time turn off the pool pump.
- Close valves between filter and pool to prevent pool draining.
- Unplug the DC cable from the electrolytic cell.
- Turn the large collar counterclockwise to remove and save for reinstallation.
- Remove the O-ring and discard.
- Remove the existing the electrolytic cell from the vessel.
- Install the O-ring provided in the kit. Make sure the O-ring is seated properly.
- Install the new electrolytic cell into the vessel.
- Hand tighten the large collar. Do not over tighten.
- Plug the DC cable into the electrolytic cell. Press cable down firmly onto ports.
- Reset valves and switches. Turn pump and sanitizer on. Wait five (5) minutes for system to go
through its diagnostics. - Confirm chlorine output and settings on the user interface.
- For operating instructions, please refer to the Nature2 Fusion Soft Installation and Operation Manual, originally supplied with the product.
- The purer the salt the better the life and performance of the electrolytic cell. Use a salt that is at least 99.8% pure NaCl. The ideal salt is an evaporated, granulated, food-quality, non-iodized salt. Consult your salt supplier.
- Set chlorine production to 00%. Operating the unit above 00% production without salt will damage the electrolytic cell. The Salinity button C on the sanitizer user interface keypad can be used to determine salinity in the case of a new pool installation, or a complete water change so long as the chlorine production is set to 00%.
- Never use dry acid to adjust pH in arid geographic areas with excessive evaporation and minimal dilution of pool water with fresh water. A buildup of by-products can damage the electrolytic cell.
- Do not operate the electrolytic cell without water circulation. A buildup of flammable gases will result in FIRE or EXPLOSION.
- (1) Jandy R0503000 Cell
- (1) Jandy Cell O-Ring
- Jandy Nature2 Fusion Soft Water Sanitizer model FSOFT1400
Note: This cell may be compatible with your Salt Chlorination System, please refer to your systems owners manual to ensure compatibility.

